• Reservoir
1 5

EFR RESERVOIR™ 4.5

EFR RESERVOIR™ 4.5

Overcome the logistical challenges of refilling fluid for special effects machines in locations that are inaccessible, remote, or elevated.
Showcase gif
Unlock non-stop entertainment, streamline your workflow, extend machine lifespan, and enjoy uninterrupted special effects.

$1,950.97 USD
$1,950.97 USD
Sale Sold out
Shipping calculated at checkout.

The EFR RESERVOIR 4.5 is an excellent solution for maintaining SFX by automatically refilling the custom reservoir that supplies fluid directly to your special effects machines.

 

The EFR RESERVOIR 4.5 quickly pays for itself by:

  • Reducing dry running to increase SFX machine life
  • Automating refilling and eliminating manual labor
  • Increasing fluid capacity to reduce refill frequency
  • Allowing SFX machine placement flexibility
  • Bulk fluid purchasing potential for cost savings
  • Minimizing fluid spillage
  • Freeing up time for other workplace tasks

Possible applications:

  • Snow machines
  • Haze machines
  • Fog/low fog machines
  • Haunted houses
  • Christmas shows
  • Theme parks 
  • Theatres
  • Dance clubs

EFR RESERVOIR 4.5 is the complete package which includes:

  • x1 pumping module, 4.5 L/min / 1.18877 gal/min, 60 PSI Max.
  • x1 7.57 Liter / 2 Gallon nominal capacity reservoir with sensor module
  • x1 fluid level sensor for ground supply tank
  • x1 power cable with NAC3FPX-W-TOP x MALE EDISON U.S. connector
  • x2 stainless steel bolt tube clamps, 29/64" to 33/64" ID
  • Mounting hardware
  • 1 year limited warranty

Materials

PUMP MODULE:
ABS Plastic, Silicone, PVC Plastic, Polyolefin, Nylon Plastic, Polytetrafluoroethylene (PTFE).

RESERVOIR:
UV Resistant HDPE Plastic, PVC Plastic, Polypropylene Plastic, ABS Plastic, Acrylonitrile Butadiene (Buna-N) Rubber, Silicone, Polytetrafluoroethylene (PTFE), Ethylene Propylene Diene Monomer (EPDM) Rubber.

SUPPLY SENSOR:
Nylon Plastic, Polypropylene Plastic, Polyolefin, Acrylonitrile Butadiene (Buna-N) Rubber, Polyethylene, Polytetrafluoroethylene (PTFE).

Specifications

PUMP MODULE:
Input: 100-240 VAC, 50/60 Hz, 1.2 A Max.
Output: 12 VDC, 5 A Max.
Internal thermal protection: ≥ 72º C / 161.6º F
Overcurrent protection: 5 A breaker
Flow: 4.5 L/min / 1.18877 gal/min, 60 PSI Max.
Inlet fitting: 1/4” ID, barb
Outlet fitting: 1/4” ID, barb

RESERVOIR:
Nominal capacity: 10 Liter / 2.64 Gallon
Pressure release: 5740 ml/min, @ dP=1 kPa
Inlet fitting: 1/2" OD push-to-connect, sleeve lock
Outlet fitting: 1/4" OD push-to-connect, sleeve lock

Safety Features

Ingress Protection

PUMP MODULE:
Enclosure: IP67
Vent: IP67
XLR Chasis: IP65, UV rated
Power Chasis: IP65, UV rated
Power Switch: IP65
LED Indicators: IP65

RESERVOIR:
Pressure release: IP67
Sensor Module Enclosure: IP65
XLR Chasis: IP65, UV rated

Dimensions

PUMP MODULE:
• 9.5” L x 12.5” W x 4.75” H
• 5.4lbs

RESERVOIR:
• 13.2” L x 7.7” W x 11” H
• 2.29lbs

Shipping & Returns

Shipping:

Standard shipping does not include insurance.

Shipping upgrades are avaialble at checkout which includes full value shipping insurance.

All orders currently shipping from San Antonio, TX.

Returns:

Items may be returned within a 14 day period from date of delivery.

Eligible returns can receive a full refund.

All security seals on the product must be intact.

Review our return/refund policy for more information.

Operators Manual Specification Sheet
Click to view disclaimer ◄

To allow for greater and more specific customization of your setup, tubing is not included.

Recommended tubing:

  • PUMP INLET: Flex PVC 1/4" ID x 1/2" OD
  • PUMP OUTLET: Flex PVC 1/4" ID x 1/2" OD
  • RESERVOIR OUTLET: Flex PVC 1/8" ID x 1/4" OD

ALL ORDERS ARE CUSTOM MADE AND PROCESSING TIMES VARY PER ORDER. PLEASE READ THE RETURN/REFUND POLICY AND WARRANTY POLICY BEFORE PURCHASING.

NOT FOR USE WITH FLAMMABLE OR HAZARDOUS FLUIDS. ONLY USE FLUID AS SPECIFIED BY YOUR EFFECT MACHINE'S PRODUCT GUIDELINES.

Additional Notes:

  1. Tube reducers may be required for connecting the reservoir to specific effect machines.
  2. The maximum fluid push capability of the EFR Reservoir 4.5 has currently only been tested at a distance of 145 feet away from the pump, reaching 45 feet in the air and an additional 100 feet away from the peak. However, mathematical calculations support the potential for even greater distances. Keep in mind that high altitude fluid push may result in reduced flow rate and efficiency. The maximum distance of use is dependent on a variety of factors including, but not limited to, fluid type, tubing type and size, ambient and fluid temperature, connecting cable wire gauge, and more. For detailed information, please refer to the operator's manual. To ensure optimal performance, all relevant variables should be considered when planning your setup. The use of quick connect/link adapters is not recommended.
  3. The pump and reservoir both have check valves at their outlets to prevent backflow. Any inline check valves in the tubing should have a minimum opening pressure of 1 and a working pressure of 60PSI or higher.
View full details